CELE Transportation & Highway Engineering — Pavement Design (Flexible and Rigid)Slides
Visual slide deck for Pavement Design (Flexible and Rigid). Perfect for reviewers who prefer seeing concepts laid out with diagrams and bullet points rather than long paragraphs. Built specifically for CELE Transportation & Highway Engineering aspirants preparing for the 2026 cycle.
Exam context
For the Civil Engineer Licensure Examination, Professional Regulation Commission (PRC) — Board of Civil Engineering tests Transportation & Highway Engineering under a "Core" label, with Pavement Design (Flexible and Rigid) in the 3rd slot across 4 chapters. CELE candidates must clear the 70% weighted average, no sub-test below 50% cut on the 2026 paper, which draws about a meaningful share of Transportation & Highway Engineering questions. Date to watch: May and November 2026.
Pavement Design (Flexible and Rigid) - Slides
Slides
Introduction to Pavement Systems
Slide Id
S1
Flexible vs Rigid Pavement: Load Path Comparison
Slide Id
S2
Flexible Pavement Structure and Materials
Slide Id
S3
Rigid Pavement Structure and Materials
Slide Id
S4
Subgrade Strength: CBR (California Bearing Ratio)
Slide Id
S5
Modulus of Subgrade Reaction (k-value) for Rigid Design
Slide Id
S6
Tire Contact Area and Pressure Distribution
Slide Id
S7
Tire Contact Area—Worked Examples
Slide Id
S8
Equivalent Single Axle Loads (ESAL) and Load Equivalency Factor
Slide Id
S9
LEF Calculation and Examples
Slide Id
S10
Traffic Loading and Design ESAL—Practical Example
Slide Id
S11
Westergaard Stress Analysis for Rigid Pavements
Slide Id
S12
AASHTO Flexible Pavement Design Method—Structural Number (SN)
Slide Id
S13
CBR Method for Flexible Pavement Design
Slide Id
S14
Failure Modes and Distress in Flexible Pavements
Slide Id
S15
Failure Modes and Distress in Rigid Pavements
Slide Id
S16
Comparison of Flexible vs Rigid Pavement Design
Slide Id
S17
Philippine Standards and Practice (RA 544, DPWH Guidelines)
Slide Id
S18
Design Example 1: Flexible Pavement (CBR Method)
Slide Id
S19
Design Example 2: Rigid Pavement (Westergaard Analysis)
Slide Id
S20
Summary: Key Formulas and Design Parameters
Slide Id
S21
Conclusion and Exam Preparation Tips
Slide Id
S22
Stored In
chapter_slides
Slide Count
22
Summary Only
true
Previous chapter
Traffic Engineering and Highway Capacity
Next chapter
Ports, Harbors, Airports and Railroads
Ready to practise for the CELE 2026?
Super Tutor's AI review plan adapts to your weak areas and builds a weekly practice schedule around your target CELE exam date.