CELE Geotechnical Engineering — Soil ClassificationSlides
Slide deck for CELE Geotechnical Engineering — Soil Classification. These slides are built for quick visual review, highlighting the key concepts, formulas, and question patterns from this chapter of the CELE 2026 syllabus.
Exam context
For the Civil Engineer Licensure Examination, Professional Regulation Commission (PRC) — Board of Civil Engineering tests Geotechnical Engineering under a "Core" label, with Soil Classification in the 2nd slot across 11 chapters. CELE candidates must clear the 70% weighted average, no sub-test below 50% cut on the 2026 paper, which draws about a meaningful share of Geotechnical Engineering questions. Date to watch: May and November 2026.
Soil Classification - Slides
Slides
Soil Classification: Introduction and Importance
Slide Id
S1
Grain-Size Distribution and Sieve Analysis
Slide Id
S2
Coefficient of Uniformity (Cu) and Coefficient of Curvature (Cc)
Slide Id
S3
Worked Example: Gradation Parameters for Sand
Slide Id
S4
Atterberg Limits: Definitions and Significance
Slide Id
S5
Plasticity Chart and A-Line Classification
Slide Id
S6
Worked Example: Plasticity Classification
Slide Id
S7
Unified Soil Classification System (USCS) Overview
Slide Id
S8
USCS Classification Rules for Coarse-Grained Soils
Slide Id
S9
USCS Classification Rules for Fine-Grained Soils
Slide Id
S10
AASHTO Classification System
Slide Id
S11
Group Index Calculation
Slide Id
S12
Worked Example: AASHTO Group Index
Slide Id
S13
Comparison: USCS vs. AASHTO Classification
Slide Id
S14
Common Board-Exam Pitfalls and Study Tips
Slide Id
S15
Chapter Summary and Key Takeaways
Slide Id
S16
Stored In
chapter_slides
Slide Count
16
Summary Only
true
Ready to practise for the CELE 2026?
Super Tutor's AI review plan adapts to your weak areas and builds a weekly practice schedule around your target CELE exam date.